Payment & Shipping Terms:
|Application:||Lifebuoy Light, Position Indication Light||Material:||ABS Shell, PC Bulb Cover|
|Standard:||SOLAS||Service Life:||Depend On Battery|
|Battery Type:||Alkaline Battery Size D|
life saving ring,
life preserver ring
SOLAS Marine Dry Battery Lifebuoy Light Position Indication Strobe Light
Lifebuoy lights are equipped on the lifebuoys applied for persons who falling into the water or lifeguards as light signals to indicates the position.
2. Specification & Main parameter:
1.Battery: Size D, Alkaline Battery
2. Environment temperature: -30℃~65℃
3. Working temperature : -1℃~30℃
4. Working Time: ≥2 hours
5. Working voltage: 6.0V
6.luminous intensity: ≥2 cd
7.luminous Type: Flashing
8.Flash frequency: 50~70/ min
9.Validity: 5 year
10. Size: ¢91×355mm
3. How to work:
When lifebuoy was thrown into the water, Life buoy lights will automatically fall out of bracket into the water vertically, and it begins blinking. The Lifebuoy light is completely sealed and waterproof with the lamp cap 50mm above the water, that ensures the lamp cap can emit bright and stable flashing light signal continuously, and can be seen clearly above the range of radians 180. When the lifebuoy leaves the surface of water, the lifebuoy light is lifted simultaneously and stop flashing, so that it can effectively conserve battery power and increase working time.
4.1 Check surface of Lifebuoy lights are not damaged or corroded, and check the 1# alkaline battery is intact.
4.2 Check printed label on surface of Lifebuoy lights is within the validity period, if it exceeds the expiration date which marked on the label, it should be removed and replaced with a new light to ensure safety.
4.3 Take out the lifebuoy lights from the lamp holder, the lamp face upright position, automatically lighting and flashes are normal, the lamp will automatically turn off flashing when placed upside down position, that prove the light is in good condition, can be for normal use, then turns it upside down in the lamp holder.
4.4 ensure the Lifebuoy Lights is always in the correct position that during storage.
5 Lifebuoy lights have the following conditions should be stoped using immediately : Outer case , shade Deformation, cracks, scratches or serious damage or seals cracks, If there is any quality problem or other situation make the lifebuoy can not be used, you should contact with the manufacturer as soon as possible(Each light have Ex certificate).
6 If there is any explosive gas mixtures, replace or remove the battery is not be allowed.
Contact Person: Mr. Wade.Qian