Payment & Shipping Terms:
|Product Name:||SOLAS Liferaft Light||Application:||Equip On Liferaft To Give Light Signal In Night For Lifesaving At Sea|
|Lum:||>4.3cd Outside / >0.5cd Inside||Working Time:||>8 Hours|
|Standard:||SOLAS 74/96||Warranty:||5 Years|
life vest light,
life raft light
EC/MED Approval LED Life Raft Light Ship’s Wheel Mark Liferaft Indication Lights
LED lithium battery liferaft lights is composed three parts of an external lights, an internal lights, a battery main body. Internal and external lights are respectively connected with the wire connected to the battery main body, the battery supply power to the internal and external lights. In the liferaft inflation process, cell body on the plug was pulled out of the battery at the same time, was launched, to supply the power for the internal and external lights, lights and began to work outside. The external lights can emit high luminance flicker signal, facilitate rescuers found; the internal lights can emit enough light lighting for reading chart or instructions within the raft.
The company production of LED lithium battery self-igniting light for lifebuoy, using the new LED light emitting diode and a special constant current flash circuit board, has the advantages of high reliability, long life, energy saving, environmental protection etc.
Compliance with SOLAS 74/96 Amendments; MSC.48(66). The International Life-saving Appliance (LSA) Code; MSC.(81)70 Revised Recommendation on Testing of Life-saving Appliances; MSC.218(82) Amendments to the International Life-saving Appliance Code; MSC.200 ( 80),MSC.226(82), MSC.323 ( 89 ) Amendments to the Revised Recommendation on Testing of Life-saving Appliances and ISO 24408.
1, The battery into the battery bonding column in Punta bag;
2, Showing the position lamps installed in the raft outside the Punta column to the top;
3, Within a lighting installed in the raft or the vertical column column Peng Fang
4, Pull the switch or the Department of the Peng-chu, and the life raft floating tire rope at the bottom
of the appropriate column.
5, lithium battery shell particles of imported ABS material die casting has good oil and anticorrosion,
rubber die casting lamp part is, there is a good waterproof shockproof effect.
6, the power part of the adoption of good performance of the lithium battery ER34615, can be -30 ℃
+65 ℃ environment in the normal discharge
7, The Ministry of imported lamp light-emitting LED chip, LED and driver circuit board and the
regulator circuit board, so that can play a good battery utilization, can extend the battery life and light
effects (light-emitting frequency of 50-70 times per minute)
Main Technical Specifications
External lights luminous Intensity
≥ 4.3 cd
External lights flash frequency
50-70 Flashes/ min
≥ 12 h
Internal lights luminous Intensity
≥ 0.5 cd
Period of validity
Contact Person: Mr. Wade.Qian