Payment & Shipping Terms:
|Product Name:||SOLAS Lifebuoy Light||Application:||Equip On Lifebuoy To Give Light Signal In Night For Lifesaving At Sea|
|Lum:||>2cd||Working Time:||>8 Hours|
|Standard:||SOLAS 74/96||Warranty:||5 Years|
life saving ring,
water rescue ring
SOLAS Apporval Marine Life Saving Ring Light Lifebuoy Light Flash Type Lithium Battery
Lifebuoy lights are equipped on the lifebuoys applied for persons who falling into the water or lifeguards as light signals to indicates the position.
1. The shell of the lifebuoy light is sealed and made by ABS plastic, Shade is made of transparent PC material, corrosion resistance, impact resistance, durable, when it falls, or collide with other objects will not produce sparks, it is safe and reliable.
2. The bulb as light source,circuit is made by constant current boost chip, high luminous efficiency, stable and reliable performance; ball switch controls the power, when the light turns upside down, is off, When place it upright it will emit flashing signal.
according to the new standards amended in 1996,and all of their properties are complied with the standards of the “safety of life at sea”(SOLAS) (1974) amended in 1996.
When lifebuoy was thrown into the water, Life buoy lights will automatically fall out of bracket into the water vertically, and it begins blinking. The Lifebuoy light is completely sealed and waterproof with the lamp cap 50mm above the water, that ensures the lamp cap can emit bright and stable flashing light signal continuously, and can be seen clearly above the range of radians 180. When the lifebuoy leaves the surface of water, the lifebuoy light is lifted simultaneously and stop flashing, so that it can effectively conserve battery power and increase working time.
Main Technical Specifications
|light intensity||>2cd||flash rate:||50-70times/min|
|Working time:||>2h||color of light:||White|
|Working Voltage:||6V||out size||¢83×240mm|
|temperature range:||-30~65||Waranty||5 Years|
|water temp range||-1~30||Standard||SOLAS 74/96|
Lifebuoy lights installing:
Using two screws to install the lifebuoy lights bracket on the appropriate location, the bracket installation should be ensured in inverted state, smooth release with lifebuoys, don’t exceed the recommended installation height of 30 meters water, the connection wire of lifebuoy lights could be tied to lifebuoys, Lifebuoy lights connected with lifebuoy by rope to ensure lifebuoy light always near the lifebuoy.
Contact Person: Mr. Wade.Qian